Lustral Floor Co. in Brossard
Lustral is a specialist commercial floor company. Stripping and waxing, concrete polishing, epoxy coating, hardwood refinishing, tile and grout restoration. The work is documented before-and-after, and the result is what we sell.
Eight Floor Care Specialties Under One Roof in Brossard
From a one-time strip-and-wax to a recurring maintenance program, every Lustral project is run by a specialist crew with the right equipment for the surface.
Strip & Wax
Full strip and re-wax of VCT, vinyl and resilient flooring.
Concrete Polishing
Mechanical polishing for warehouse, retail and showroom concrete.
Epoxy Floor Coating
Industrial epoxy systems for warehouses, mechanical rooms and showrooms.
Hardwood Refinishing
Sand, stain and finish hardwood floors in offices and showrooms.
Tile & Grout Restoration
Deep cleaning and re-sealing of ceramic, porcelain and stone tile.
Warehouse Floor Sealing
Densifier and sealer programs for high-traffic warehouse concrete.
Anti-Slip Treatments
Slip-resistance treatments for kitchens, ramps and entry zones.
Recurring Maintenance
Burnishing, recoating and care programs that extend floor life 5x.
Six Reasons Property Managers Choose Specialists
Specialist Crews Per Surface
Concrete polishing, epoxy, hardwood and VCT each require different equipment, chemistry and technique. Lustral crews specialize. Generalists ruin floors.
Before/After Documentation
Every project gets a photo set. The before, the during, and the after. You see exactly what you are paying for and you have evidence for the building owner.
Right Equipment, Not Borrowed
High-speed burnishers, planetary diamond grinders, dust-extraction shrouds, autoscrubbers. Bought, maintained, calibrated. Not rental returns.
Maintenance Plans That Compound
A polished or sealed floor that gets the right recurring maintenance lasts five times longer. We design the maintenance with the project, not after.
Bilingual & Insured
Bilingual project management in EN / FR, $5M general liability, fully bonded. Standard for the property managers and brokers we work with.
Recurring + One-Time
Many clients start with a one-time restoration and roll into a recurring maintenance contract. Same crew, same standard, predictable results.
Five Steps. Photo-Documented Throughout.
Survey
On-site assessment of the surface, condition, traffic, lighting and end-use.
Specify
Recommendation matched to surface and use case — chemistry, equipment, finish.
Prepare
Edge work, dust control, area protection, equipment staging. Done right means done once.
Restore
Stripping, polishing, coating, refinishing — by the crew that specializes in that surface.
Document
Photo set, maintenance recommendations, optional recurring program.
Commercial Floor Care in Brossard, QC
Our Brossard team delivers the same standard of service that Lustral is known for across Canada. Whether you need a one-time project or a recurring program, our local team in Brossard is ready.
Lustral Near Brossard
Lustral Floor Co. in Brossard — Frequently Asked Questions
What kinds of floors do you work on?+
VCT, vinyl tile, concrete (polished and sealed), epoxy coatings, hardwood, ceramic and porcelain tile with grout, terrazzo, rubber and luxury vinyl plank.
What is the difference between sealing and polishing concrete?+
Sealing applies a topical coating that wears off in high-traffic areas. Polishing is a mechanical process that densifies and refines the concrete itself — no coating to wear. Polishing lasts much longer in commercial environments. We do both, and we will tell you which one is right for your floor.
Do you work after hours?+
Yes — most retail, office and warehouse floor work is done overnight or weekends to avoid disruption. We schedule around your operating hours.
Do you provide before/after photos?+
Yes, on every project. The photo set is part of the deliverable and lives with your service record.
How long does a typical floor restoration take?+
A small office strip-and-wax might be a single overnight. A large warehouse polish can take a full weekend. A hardwood refinish typically needs three to five days. Every quote includes a clear timeline.
Can you set up a recurring maintenance program?+
Yes — and you should want one. The right maintenance program extends a restored floor by 3-5x. We design the program with the project, not after.
What about dust and disruption?+
All our planetary grinders use HEPA-rated dust extraction. We build temporary partitions where needed. Most of our clients tell us the most surprising part is how clean the work site stays.
Have a Floor That Deserves Better?
Send us a few photos of the surface. A Lustral specialist will respond within one business hour with the right approach and a quote. Free site survey for commercial spaces.